Savant Power · Solar · Storage

Whole-home backup that thinks in circuits, not just kilowatts.

We design and install Savant Power — solar on the roof, lithium iron phosphate storage on the wall, and load shedding at the breaker — so lights, HVAC, and the network stay up when the grid does not.

Energy storage

Savant Power Storage 20 and 50.

All-in-one inverter and battery stacks. LiFePO₄ chemistry, 90% depth of discharge, 10-year warranty class. PS20 is a 20 kWh stack (about 18.5 kWh usable) with 12.5 kW continuous output. PS50 is a 50 kWh stack. Stack units for services from 200 A to 800 A — up to ten inverters in parallel for large homes and commercial work.

Partial-home or whole-home backup. Works with solar, without solar, or with an automatic generator. Same Savant app as the lights and the theater.

What the system actually does

Smart power control. Real load shedding.

Savant Power Modules sit in a standard panel (Square D QO, Eaton CH, and others). Each module measures and switches the circuit. When the grid drops — or when the battery budget is tight — Flexible Load Management sheds what can wait and keeps what cannot.

Circuit-level control

Fridge, well pump, HVAC, EV charger, and the media rack are not one lump load. You assign critical, preferred, and shed-first circuits. The panel executes that plan without anyone standing at the breaker.

Energy modes

Eco Mode leans on solar and battery to cut peak utility. Power Outage Mode holds the reserve you set. Storm Watch fills the stack from the grid before the weather hits. Time-of-use plans shift charging off-peak.

Panel Limit

The inverter watches the bus so added storage does not overload an existing panel. Useful for rate arbitrage and upgrades that should not start with a 400 A service change.

Solar, AC or DC

DC-coupled solar into the Savant inverter MPPTs (up to 17 kW per inverter). AC-coupled arrays already on the roof stay in place. Priority is solar on loads, then battery, then the utility.

Generator, if you already have one

Flexible Load Management talks to an automatic transfer switch. Non-critical circuits drop so a generator that is not sized for the whole house still carries the rooms that matter.

EV and the rest of the house

Savant Level 2 charger in the same app. Scenes can dim lights, hold climate, and pause the car when the battery is covering an outage.

Solar

Homes and commercial roofs.

We specify and integrate rooftop and structure-mounted arrays for residences, estates, and commercial buildings — then hand production to Savant Power so the house (or the shop) knows what the sun is doing in real time.

New arrays or existing ones. DC-coupled into PS20/PS50, or AC-coupled and monitored. The point is not a stack of apps. It is one system with lighting, shades, security, and backup.

Numbers that matter on a bid

PS20

20 kWh stack · ~18.5 kWh usable · 12.5 kW continuous · LiFePO₄ · 93.8% round-trip class · 90% DoD.

PS50

50 kWh stack · 12.5 kW continuous per inverter · dual-inverter 25 kW · DC solar to 17 kW · 10-year warranty class.

Scale

200 A to 800 A services. Up to ten inverters in parallel. Storage from 20 kWh into the hundreds. Homes and commercial buildings.

Savant also monitors third-party batteries (Tesla Powerwall, Franklin, Enphase, Sol-Ark) when the job already has a stack. We will tell you when the Savant pack is the cleaner path.

Talk through a power project
Questions · Ask AI Answers stay on this page
Hi — ask about lighting, Savant Power, solar, monitoring, or how a project starts.